PRODUCT & SERVICES

Proportional hydraulic bank

The servo control MOD10 is a block of modular hydraulic pistons, electrically controlled by a couple of proportional valves, with mechanical feedback.
The product has a high reliability thanks to careful engineering and production process carried out with the most advanced technologies.The installation of this block adds to a hydraulic valve the remote control, by cable or by radio. The specific design for the dual control rods allows its installation on any type of hydraulic mechanical valve.

Electrical specifications:

  • Power supply: 12V or 24V
  • Working current range: 600 ÷ 1400 mA (12V) /300 ÷ 700 mA (24V)
  • Frequency: 50 Hz
  • Working temp. range: -20 ÷ +60 °C
  • Connectors: DIN 43650 A

Hydraulic / mechanical specifications:

  • Mechanical stroke: ±13 mm
  • Feedback: Mechanical
  • Fluid type: Mineral oil 10 ÷ 200 cSt
  • Max blow-by: 100 cc/minute
  • Max working pressure: 30 bar
  • Max thrust: 1300 N (at 30 bar)
  • Weight (each section): 1.6 kg approx.
  • Dimensions (mm):200 (W) x 130 (H) x 35 (D)
  • Connections: G1/4″ BSPP