PRODUCT & SERVICES

The range of our joysticks includes several solution suitable to different types of application:
• From “finger” joysticks 1,2,3 axes with potentiometric output, or Hall effect version;
• To “handle” joysticks 1,2,3 axes, available with signal output (also ratiometric), current (PWM) and CAN-BUS

MAP2 / MAS2 / MAC2: SINGLE AXIS JOYSTICKS

The MAP2, MAS2 and MAC2 are single axis joysticks designed to control 2 proportional solenoids. MAS2 version has signal outputs, while MAP2 has power outputs (PWM). MAC2 instead, has CAN bus outputs.All versions of joystick are supplied with a spring return simple knob or, optionally, with mechanical clutch.

Furthermore, the 3 types of joystick are available with finger joystick, also in this case, with or without clutch. The versions with finger joystick are called respectively MAP2LMAS2L and MAC2L.

Like our 2 and 3-axis versions, all our one axis joysticks can be programmed directly by the installer using our AIS interface.If the joystick has to be fitted on machines working in high-salinity ennvironments, we also have versions for marine use. These models, called MAP3, are subjected to special treatments that allow them to better resist against salt.

Technical Specification Please Click

JS / JP / JC: 2-AXIS AND 3-AXIS JOYSTICKS

Our JS-JP-JC range of Faber-Com 2-axis and 3-axis joysticks is available with signal outputs (JS), power/PWM outputs (JP) or CAN bus outputs (JC). The digital electronic board on each version, allows you to configure different parameters using a Serial Interface Adapter (AIS). The handle is customizable with: push buttons, switches, thumbwheel and rocker switches

Overview of the handle type Please click
Technical Specification JP-JS-JC Please click

MANP / MANP2 / MANP3 / MANP4: POTENTIOMETRIC JOYSTICK

MANP-MANP2-MANP3-MANP4 range includes potentiometric joysticks with one axis (MANP), two axes (MANP2), three axes (MANP3) and two axes with Hall effect (MANP4).Every version can be supplied with wirings, under request.

Moreover, our MANP2, MANP3 and MANP4 versions are also commonly used on Scanreco G2B and Scanreco G3 transmitters.

For Techincal Specification Please click

PCG PWM PROPORTIONAL CONTROL GRIP

PWM proportional control grip able to directly command a couple of proportional solenoids.
The precision and reliability of the operation is always guaranteed, thanks to its PWM current closed loop control.

Furthermore, PCG control handles are fully programmable by the customer, thanks to their integrated serial port. You will simply need our SepSim software (provided free of charge) and our AIS serial adapter.

Like our JP/JS/JC joysticks, all PCG handles can be customized with different versions of:

  • Push buttons
  • Switches
  • Rocker switches
  • Capacitive dead man

Lastly, the integrated LED provides useful information about the status of the device, the activation via haptic feedback/dead man trigger, error codes and more.

A typical application of the product can be on excavators (or, more in general, machines with hydraulic joysticks), whenever it is necessary to implement additional functions.

For Techincal Specification Please click