Sidepull Avoidance System

INTRODUCTION

A dual-axis angle-based safety system designed to detect and mitigate off-axis SidePull loading during crane hoisting. The module continuously monitors hook alignment and triggers configurable interlocks to protect wire rope, rope guide, hoist mechanisms, and structural components.

Key Features

  • Sensor Accuracy – +-0.3 degrees, dual-axis X/Y
  • Interlock Safety – 5 programmable outputs for motion trip logic
  • Wireless Access – Remote monitoring, setup, and calibration
  • Environment – 24V DC, IP67, -40C to +85C

Functional Characteristics

iks-sas-installation _ Sidepull Avoidance System
  • Continuous dual-axis hook inclination monitoring in X and Y axe
  • Real-time angular deviation evaluation against configurable thresholds
  • Programmable digital interlock outputs for hoisting motion safety
  • Direction-specific SidePull detection: X+, X-, Y+ and Y
  • Internal SidePull event counting for oprational statistics

Output Control Logic

  • Output 1: Trip hoisting (UP) on SidePull detection in any axis
  • Output 2: Trip hoisting on X+ axis SidePull
  • Output 3: Trip hoisting on X- axis SidePull
  • Output 4: Trip hoisting on Y+ axis SidePull
  • Output 5: Trip hoisting on Y- axis SidePull
     

Technical Specifications

  • Angle measurement accuracy: +-0.3 degrees
  • Measurement axes: Dual-axis (X, Y)
  • Operating temperature: -40 degrees C to +85 degrees C
  • Ingress protection: IP67
  • Supply voltage: 24 V DC
  • Output type: Programmable digital outputs
  • Control interface: Relay/logic interface (application dependent)
  •